Isspro EV Temperature Gauge Manual de usuario descargar pdf (Pagina 2)

Check Amplifier Box

1. With power off disconnect 2 wire connector at the temperature sensor.

2. Make sure the four wire connector going to the gauge is connected.

3. Turn power to gauge on.

4. Using a multimeter on the voltage setting check voltage at the gauge.

100°F to 240°F and 100°F to 280°F

Green(+)/Yellow(-) Temperature Sensor Output Gray(+)/White(-)

1.6 Volts Open -1.2 Volts

# 1.5 Volts 120°F 1.8 Volts

# -0.3 Volts 140°F 1.6 Volts

# Connect temperature sensor for these measurements.

140°F to 320°F

Green(+)/Yellow(-) Temperature Sensor Output Gray(+)/White(-)

1.4 Volts Open -1.6 Volts

# 1.6 Volts 140°F -0.6 Volts

# 1.4 Volts 180°F 1.4 Volts

# Connect temperature sensor for these measurements.

5. 140°F to 320°F temperature sensor may need heated using another heat source

because the engine does not heat temperature sensor above 140°F at idling.

1 2

Sin comentarios

Isspro EV Temperature Gauge Manual de usuario Pagina 2